Hand-Painted Blue and White Ceramic Wall Sconce with Brass Arm, 5 Patterns for Bathroom and Bedroom
- Hand Painted
- 5 Patterns
- Damp Rated
- E26 Socket
Free tracked shipping·2-year warranty·Support before & after purchase
Hardwired wall fixture
Light source included — ready to use
Designed for bathroom mirrors and vanity areas
Waterproof design for bathroom use
Product Details
Everything you need to know
Description
This wall sconce brings hand-painted charm to a bathroom, bedroom or hallway. A rounded ceramic shade glazed in cobalt blue and white hangs from a slender brass arm, which is fixed to a sculpted white ceramic wall plate. The look is relaxed and collected, with the warmth of a cottage interior and enough polish to sit beside a modern mirror or a freshly painted wall.
Each shade is glazed and painted by hand, so no two pieces are exactly alike. The motifs vary a little from one sconce to the next, with small differences in line, spacing and depth of colour that give every light its own character. When the bulb is switched on, the glazed shade softens it into a warm, welcoming glow, directing light down and out across the wall rather than straight into the eyes.
Choose from five patterns at checkout: Blue Daisy, Blue Stripe, Blue Dot, Blue Vine and Blue Ring. All five use the same blue and white palette and the same brass arm, so you can order a matching pair or mix two different patterns for a more personal, layered look. The sconce takes one E26 bulb up to 40W, which is not included, and runs on 110-240V. It is dimmer compatible when paired with a compatible dimmer switch, sold separately.
The shade measures W 17 x H 13 cm / W 6.7" x H 5.1", a compact size that fits neatly into tight spots beside a mirror, a bed or a doorway. The sconce is damp rated, so it suits bathrooms and ensuites as well as bedrooms, hallways and covered outdoor nooks.
Styling Ideas
In a bathroom, mount a pair either side of a mirror for even, flattering light at face height. The blue and white glaze pairs naturally with white tiles, timber vanities, brass tapware and linen towels. In a bedroom, hang one above each bedside table for a soft reading light that frees up space on the table. In a hallway or entry, a single sconce adds a warm welcome and a touch of colour to a plain wall. Mixing patterns, such as Daisy on one side and Stripe on the other, gives a relaxed, collected feel that suits cottage, coastal and traditional interiors.
Size and Placement
Beside a bathroom mirror, centre the shade at roughly eye level and space the pair evenly either side of the glass so both sides of the face are lit. Above a bedside table, mount the sconce a little higher than the top of the headboard so the shade sits clear of your head when you sit up to read. In a hallway, keep each sconce at a consistent height along the wall and allow enough clearance so the shade is not knocked as people pass.
Bulb Choice
Choose a warm white E26 bulb up to 40W to bring out the depth of the blue glaze and the warmth of the brass. A small globe or candle bulb that sits inside the shade gives the neatest look. If you plan to use a dimmer, choose a dimmable bulb and a compatible dimmer switch.
Installation
This is a hardwired wall light. It should be installed by a licensed electrician, who will connect it to the wall wiring and fix the ceramic wall plate securely with fixings to suit your wall type.
Care
Switch off the power and let the shade and bulb cool before cleaning. Wipe the ceramic and brass gently with a soft, dry cloth. Avoid abrasive pads, polishes and harsh cleaners, which can dull the glaze and mark the brass.
At a Glance
- Style: Traditional, Cottage
- Material: Hand-glazed ceramic shade and wall plate, brass arm
- Finish: Blue and white glaze with brass
- Light Source: 1 x E26 socket, max 40W, bulb not included
- Dimming: Dimmer compatible with a compatible dimmer switch (not included)
- Voltage: 110-240V
- Rating: Damp rated
Warranty
This wall sconce is backed by a 2-year warranty.
Product Specifications
| Product Type | Wall sconce |
| Style | Traditional, Cottage |
| Material | Hand-glazed ceramic shade and wall plate, brass arm |
| Finish | Blue and white glaze with brass |
| Light Source | 1 x E26 socket, max 40W, bulb not included |
| Dimming | Dimmer compatible with a compatible dimmer switch (not included) |
| Voltage | 110-240V |
| Rating | Damp rated |
| Installation | Hardwired wall mount |
| Warranty | 2 years |
Weights & Dimensions
| Shade Width | 17 cm / 6.7" |
| Shade Height | 13 cm / 5.1" |
Installation Guide
Before you start
- This is a hardwired wall fixture and should be installed by a licensed electrician, following your local electrical codes.
- If installing near a shower or bath, ask your electrician to confirm the location meets local bathroom wiring rules.
- An installation manual is included with your order. If you would like it before your order arrives, email support@buylumix.com.
Installation overview
- Turn off power at the switchboard and confirm the wires are not live.
- Remove the existing fixture, if replacing one.
- Fix the backplate to the wall at the wiring point, using fixings suited to your wall type.
- Connect the live (active), neutral and earth wires as shown in the manual.
- Secure the light to the backplate.
- Restore power and test the light.
Care
- Switch off and allow the light to cool before cleaning.
- Wipe with a soft, dry cloth. Avoid abrasive or chemical cleaners.
Need help? Our team can assist with installation or product questions at support@buylumix.com.
Why you'll love it
- Each glazed shade is painted by hand
- Five cobalt patterns to choose from
- Brass arm with a sculpted ceramic plate
- Damp rated for bathroom use
- Works beautifully as a matching pair
FAQs
What size vanity light should I choose for my mirror?
As a general guide, choose a light around 70 to 80% of your mirror's width when mounting it above the mirror. For lights mounted beside the mirror, position them around eye level, usually 160 to 170 cm from the floor.
How high should I mount it above the mirror?
Above-mirror vanity lights are usually installed around 10 to 15 cm above the top of the mirror frame. This keeps the light close enough to illuminate your face evenly while reducing harsh shadows.
Is it suitable for bathroom use?
Check the IP Rating in Product Specifications above. If no IP rating is listed, contact us at support@buylumix.com before installing near a shower, bath or other wet area.
Is it dimmable?
Check Product Specifications above. Where a dimmable version is available, you can select it in the options at the top of this page.
Does it need to be hardwired?
Yes. This is a hardwired wall fixture and should be installed by a licensed electrician, following your local electrical codes.
Request call back
Trade
Bathroom Vanity Light FAQs
What size vanity light should I choose for my mirror?
As a general guide, your vanity light should be around 70–80% of the mirror’s width when mounted above it. For side-mounted vanity lights, position the fixture around eye level, usually approximately 160–170 cm from the floor.
How high should I mount this light above the mirror?
Above-mirror vanity lights are usually installed around 10–15 cm above the top of the mirror frame. This helps position the light close enough to illuminate the face while reducing harsh shadows.
Does this fixture provide flattering light for makeup, shaving, and skincare?
Lumix bathroom vanity lights are designed to provide clean, even illumination for daily routines. Designs with acrylic or glass shades help soften the light, while warm white options around 3000K create a softer, more flattering glow.
Is this fixture suitable for bathroom use?
Bathroom suitability varies by model and installation location. Please check the waterproof rating or moisture-resistance details listed on the product page before installing in a bathroom, especially near wet zones.
Is this vanity light dimmable?
Dimmability varies by model. Some Lumix vanity lights include dimmable options, while others are standard on/off fixtures. Please check the product specifications for your chosen model.
Can this fixture be mounted horizontally or vertically?
Most Lumix vanity light bars are designed for horizontal above-mirror mounting. Some models may also be suitable for vertical side-of-mirror installation. Please check the product description for mounting orientation before purchasing.
Does it need to be hardwired?
Yes. Lumix vanity lights are hardwired wall fixtures and should be installed by a licensed electrician.